Step-by-Step Guide: Building a False Floor in Your Car for Improved Storage and Security

Do you often find it hard to fit all of your belongings into your car when traveling? Or do you worry about the safety of your valuables while driving? A false floor in your car could be the solution you've been looking for!

Not only will a false floor enable you to store more items in your vehicle, it also provides an added layer of security by keeping them out of sight from potential thieves. Plus, building one is easier than you might think!

All you need is some wood, screws, and basic carpentry skills. Simply measure the dimensions of your car's trunk and cut the wood to size. Attach the pieces together using screws and create a platform that sits flush with the top of your car's seats.

Finally, carpet the top of the platform to match your car's interior and voila! You now have a storage space that's both hidden and roomy. So why wait? Build your false floor today and enjoy stress-free travels!

"How To Build A False Floor In A Car" ~ bbaz

Introduction

Have you ever wished for more storage space in your car? Installing a false floor is an excellent way to make the most out of your vehicle’s interior, and it’s also a lot easier than you think. A false floor can give you extra storage space and a flat platform, making it ideal for hauling large items or pets. In this article, we’ll outline the steps on how to build a false floor in a car.

Step 1: Gather Your Materials

Firstly, you'll need to gather all the materials needed for constructing the false floor. You'll need a measuring tape, plywood sheets, saw, drill, screws, carpet or heavy-duty fabric, and clear-finish spray paint. The measurements of the plywood sheets will depend on the length and width of your car's trunk or cargo area.

Step 2: Measure the Cargo Area

Measure the trunk's width and length to determine the dimensions of your false floor. Make sure that you take into account any angles or curves in the cargo area so that the floor fits snugly.

Step 3: Cut Plywood Sheets

Using a saw, cut the plywood sheets based on the dimensions you have measured. While cutting, make sure that the sheet's size is perfect and matches the area's shape where you plan to install the false floor.

Step 4: Create Raised Edges

Once you have your plywood sheets ready, create raised edges around the perimeter using the extra plywood. These edges will keep items securely on the false floor. Use screws to attach them to the floor, then sand them until you get a smooth surface.

Step 5: Sand Plywood

Sand the plywood sheets to achieve a smooth and even surface, and then remove any sharp edges using a sandpaper block.

Step 6: Paint the Plywood Sheets

Apply the clear-finish spray paint to the false floor surface area as it will help protect the plywood sheet from any moisture.

Step 7: Fit Carpet or Heavy-Duty Fabric

Measure and cut the carpet or heavy-duty fabric according to the dimensions of the plywood sheets you've cut. Once you have the right size, attach it using strong glue or carpet tacks. This step ensures that your belongings won't slide around easily on the false floor.

Step 8: Install the False Floor

Once everything is ready, the next step is to install the false floor. Put the false floor onto the car's cargo area to check whether it needs any resizing or re-cutting of the edges.

Step 9: Secure the False Floor in Place

Use screws drilled into the raised borders on the plywood sheets to secure the false floor in place. You can also use Velcro strips or bolts to keep the false floor in place.

Step 10: Test Your False Floor

After securing the false floor, test it by putting heavy items on it while driving. The false floor should be sturdy enough to hold up any weight you put on it.

Conclusion

Building a false floor for your car can provide extra storage space that allows you to transport everything you need. It’s a cost-effective way to create more space in your vehicle, and with these easy steps outlined above, you can get it done without breaking a sweat!

Video How To Build A False Floor In A Car

Visit Video

If you are on the lookout for a practical and ingenious means to create more space in your car, building a false floor seems like an ideal solution. A false floor is a platform or an elevated level that provides additional storage, hidden areas, or compartments for your belongings without sacrificing the existing space of your car. However, before you start tinkering with your vehicle’s interiors, there are some important things you need to consider.

First and foremost, you need to have a clear idea of the materials and tools you will require to build the false floor. Depending on the type of car you own and the purpose of the false floor, you can use plywood, MDF, or aluminum sheets as your base material. You also have the option to install hinges, locks, or latches to secure your storage compartments in place. In terms of tools, you will need a power saw, a drill, measuring tools, screws, and brackets to shape and secure the false floor.

Secondly, it is imperative to ensure that the false floor installation does not interfere with the safety features of your car, such as airbags, seat belts, and electrical wirings. Always follow the manufacturer’s instructions and guidelines to guarantee that your installation is secure and does not pose any risks while driving. Lastly, take note of the weight distribution and the load capacity of the false floor to prevent any damage to the vehicle due to excess weight or improper balance.

Building a false floor in your car may seem daunting at first, but with proper planning and execution, it can provide a convenient and practical system to organize and maximize the space inside your vehicle. Ensure that you have all the necessary equipment and follow safety precautions to make the most out of your customized storage system.